jzz
澳门威尼斯线上赌城
07837.com
→金蜘蛛紧固件网黄页 澳门威尼斯vns5533
广告广告广告




:::金蜘蛛紧固件黄页:::

共有12个大类 316个分类  
热门分类

• • • • 
• • • • 
• • • • 
• • • • 
• • • • 
• • • • 
• • • • 
• • • • 
• • • • 
• • • • 
• • • • 
• • • • 


分类目录

07837.com螺栓
   
-- UDC 621.882.6 | GB 8-88 | 代替 GB8-76
Square head bolts-Product grade C
-- UDC 621.882.6 | GB 10-88 | 代替 GB10-76
Flat countersunk square neck bolts
-- UDC 621.882.6 | GB 11-88 | 代替 GB11-76
Flat countersunk nib bolts
-- UDC 621.882.6 | GB 12-88 | 代替 GB12-76
Cup head square neck bolts
-- UDC 621.882.6 | GB 13-88 | 代替 GB13-76
Cup head nid bolts
-- ISO 8677:1986 | GB 14-1998 | 代替 GB14-88
Cup head square neck bolts with large head-Product grade C
-- UDC 621.882.6 | GB 15-88 | 代替 GB15-76
Cup head nib bolts with large head
-- UDC 621.882.6 | GB 27-88 | 代替 GB27-76
Hexagon fit bolts-product grade A and B
-- UDC 621.882.6 | GB 28-88 | 代替 GB28-76
Hexagon fit bolts with split pin hole on shank-product grade A and B
-- UDC 621.882.6 | GB 29.1-88 | 代替 GB29-76
Hexagon bolts with slot on head -product A and B
-- UDC 621.882.6 | GB 29.2-88 | 代替 GB29-76
Cross recessed hexagon bolts with indentation
-- UDC 621.882.6 | GB 31.1-88 | 代替 GB31、23、24-76
Hexagon bolts with split pin hole on shank-product grade A and B
-- UDC 621.882.6 | GB 31.2-88 | 代替 GB31、23、24-76
Hexagon bolts with split pin hole on shank-Reduced shank-product grade B
-- UDC 621.882.6 | GB 31.3-88 | 代替 GB31、23、24-76
Hexagon bolts with split pin hole on shank-Fine pitch thread-product grade A and B
-- UDC 621.882.6 | GB 32.1-88 | 代替 GB32、25、26-76
Hexagon bolts with wire holes on head-product grade A and B
-- UDC 621.882.6 | GB 32.2-88 | 代替 GB32、25、26-76
Hexagon bolts with wire holes on head-Reduced shank-product grade B
-- UDC 621.882.6 | GB 32.3-88 | 代替 GB32、25、26-76
Hexagon bolts with wire holes on head-Fine pitch thread-product grade A and B
-- UDC 621.882.6 | GB 35-88 | 代替 GB35-76
Square head bolts with small head-praduct grade B
-- UDC 621.882.6 | GB 37-88 | 代替 GB37-76
Bolts for T-Slot
-- GB /T794-93 | 代替 GB794-67
Strengthened cup head square neck bolts
-- UDC 621.882.6 | GB 798-88 | 代替 GB798-76
Eye bolts
-- UDC 621.882.6 | GB 799-88 | 代替 GB799-76
Eyelet bolts
-- UDC 621.882.6 | GB 800-88 | 代替 GB800-77
Flat countersunk double nib bolts
-- ISO 8678:1988 | GB /T 801-1998 | 代替 GB801-88
Cup head square neck bolts with small head and short neck-product grade B
-- ISO 4016:1999 | GB /T 5780-2000 | 代替 GB/T 5780-1986
Hexagon head bolts-product grade C
-- ISO 4018:1999 | GB /T 5781-2000 | 代替 GB/T 5781-1986
Hexagon head bolts-Full thread-product grade C
-- ISO 4014:1999 | GB /T 5782-2000 | 代替 GB/T 5782-1986
Hexagon head bolts
-- ISO 4017:1999 | GB /T 5783-2000 | 代替 GB/T 5783-1986
Hexagon head bolts-Full thread
-- UDC 621.882.6 | GB 5784-86 | 代替 GB30、21-76
Hexagon head bolts-Reduced shank -Product grade B
-- ISO 8765:1999 | GB /T 5785-2000 | 代替 GB/T 5785-1986
Hexagon head bolts with fine pitch thread
-- ISO 8676:1999 | GB /T 5786-2000 | 代替 GB/T 5786-1986
Hexagon head bolts with fine pitch thread-Full thread
-- UDC 621.882.6 | GB 5789-86 |
Hexagon flange bolts-Heavy series-product grade B
-- UDC 621.882.6 | GB 5790-86 |
Hexagon flange bolts-Heavy series-product grade B
-- ISO 4162:1990 | GB /T 16674-1996 | 代替 GB/T 5787、5788-1986
Hexagon flange bolts-Small series
-- GB /T 16939-1997 |
High strength bolts for joints of space grid structures
查看螺柱的所有分类螺柱
   
-- UDC 621.882 | GB 897-88 | 代替 GB897-76
Double end studs-bm=1d
-- UDC 621.882 | GB 898-88 | 代替 GB898-76
Double end studs-bm=1.25d
-- UDC 621.882 | GB 899-88 | 代替 GB899-76
Double end studs-bm=1.5d
-- UDC 621.882 | GB 900-88 | 代替 GB900-76
Double end studs--bm=2d
-- UDC 621.882 | GB 901-88 | 代替 GB901-76
Double end studs(clamping type) -Product grade B
-- GB 902.1-89 | 代替 GB902-76
Weld studs for manual welding
-- GB 902.2-89 | 代替 GB902-76
Weld studs for arc welding
-- GB 902.3-89 | 代替 GB902-76
Weld studs for capacitor discharge welding
-- UDC 621.882 | GB 953-88 | 代替 GB953-76
Double end studs(clamping type)-product grade C
-- GB /T 15389-94 |
Threaded rods
查看螺母的所有分类螺母
   
-- UDC 621.882.3 | GB 39-88 | 代替 GB39-76
Square nuts-product grade C
-- ISO 4034:1999 | GB /T41-2000 | 代替 GB/T 41-1986
Hexagon nuts-product grade C
-- ISO 621.882.3 | GB 56-88 | 代替 GB56-76
Hexagon thick nuts
-- UDC 621.882.3 | GB 62-88 | 代替 GB62-76
Wing nuts
-- UDC 621.882.3 | GB 63-88 | 代替 GB63-76
Lifting nuts
-- UDC 621.882.3 | GB 802-88 | 代替 GB802-76
Acorn nuts
-- UDC 621.882.3 | GB 804-88 | 代替 GB804-76
Hexagon nuts with raised face
-- UDC 621.882.3 | GB 805-88 | 代替 GB805-76
Tight nuts
-- UDC 621.882.3 | GB 806-88 | 代替 GB806-76
Knurled nut with collar
-- UDC 621.882.3 | GB 807-88 | 代替 GB807-76
Knurled nuts
-- UDC 621.882.3 | GB 808-88 | 代替 GB808-76
Small hexagon thin nuts-Fine pitch thread
-- UDC 621.882.3 | GB 809-88 | 代替 GB809-76
Lnsert round nuts
-- UDC 621.882.3 | GB 810-88 | 代替 GB810-76
Small round nuts
-- UDC 621.882.3 | GB 812-88 | 代替 GB812-76
Round nuts
-- UDC 621.882.3 | GB 815-88 | 代替 GB815-76
Round nuts with drilled holes in one face
-- UDC 621.882.3 | GB 816-88 | 代替 GB816-79
Round nuts with set pin holes in side
-- UDC 621.882.3 | GB 817-88 | 代替 GB817-76
Slotted round nuts
-- ISO 7040:1997 | GB /T 889.1-2000 | 代替 GB/T 889-1986
Prevailing torque type hexagon nuts(with non-metallic insert),style 1
-- ISO 10512:1997 | GB /T 889.2-2000 |
Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with fine pitch thread
-- UDC 621.882.3 | GB 923-88 | 代替 GB923-76
Acorn nuts
-- ISO 4032:1999 | GB /T 6170-2000 | 代替 GB/T 6170-1986
Hexagon nuts,style 1
-- ISO 8673:1999 | GB /T 6171-2000 | 代替 GB/T 6171-1986
Hexagon nuts,style 1,with fine pitch thread
-- ISO 4035:1999 | GB /T 6172.1-2000 | 代替 GB/T 6172-1986
Hexagon thin nuts(chamfered)
-- ISO 10511:1997 | GB /T 6072.2-2000 |
Prevailing torque type hexagon thin nuts(with non-metallic insert)
-- ISO 8675:1999 | GB /T 6173-2000 | 代替 GB/T 6173-1986
Hexagon thin nuts(chamfered) with fine pitch thread
-- ISO 4036:1999 | GB /T 6174-2000 | 代替 GB/T 6174-1986
Hexagon thin nuts(unchamfered)
-- ISO 4033:1999 | GB /T 6175-2000 | 代替 GB/T 6175-1986
Hexagon nuts,style 2
-- ISO 8674:1999 | GB /T 6176-2000 | 代替 GB/T 6176-1986
Hexagon nuts,style 2,with fine pitch thread
-- ISO 4161:1999 | GB /T 6177.1-2000 | 代替 GB/T 6177-1986
Hexagon nuts with flange
-- ISO 10663:1999 | GB /T 6177.2-2000 |
Hexagon nuts with flange-fine pitch thread
-- UDC 621.882.3 | GB 6178-86 | 代替 GB57~58-76
Hexagon slotted and castle nuts,style 1 -product grades A and B
-- UDC 621.882.3 | GB 6179-86 | 代替 GB57~58-76
Hexagon slotted nuts,style 1 -product grade C
-- UDC 621.882.3 | GB 6180-86 |
Hexagon slotted and castle nuts,style 2 -Product grades A and B
-- UDC 621.882.3 | GB 6181-86 | 代替 GB59~60-76
Hexagon thin slotted nuts-Product grades A and B
-- ISO 7041:1997 | GB /T 6182-2000 | 代替 GB/T 6182-1986
Prevailing torque type hexagon nuts(with non-metallic insert),style 2
-- ISO 7043:1997 | GB /T 6183.1-2000 | 代替 GB/T 6183-1986
Prevailing torque type hexagon nuts with flange(with non-metallic insert)
-- ISO 12125:1997 | GB /T 6183.2-2000 |
Prevailing torque type hexagon nuts with flange(with non-metallic insert)with fine pitch thread
-- ISO 7719:1997 | GB /T 6184-2000 | 代替 GB/T 6184-1986
Prevailing torque type all-metal hexagon nuts,style 1
-- ISO 7042:1997 | GB /T 6185.1-2000 | 代替 GB/T 6185-1986
Prevailing torque type all-metal hexagon nuts,style 2
-- ISO 10513:1997 | GB /T 6185.2-2000 |
Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread
-- ISO 7720:1997 | GB /T 6186-2000 | 代替 GB/T 6186-1986
Prevailing torque type all-metal hexagon nuts,style 2-Property class 9
-- ISO 7044:1997 | GB /T 6187.1-2000 | 代替 GB/T 6187-1986
Prevailing torque type all-metal hexagon nuts with flange
-- ISO 12126:1997 | GB /T 6187.2-2000 |
Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread
-- UDC 621.882.3 | GB 9457-88 | 代替 GB57、58-76
Hexagon slotted and castle nuts,style 1-fine pitch thread-product grades A and B
-- UDC 621.882.3 | GB 9458-88 |
Hexagon slotted and castle nuts,style 2--Fine pitch thread -Product grades A and B
-- UDC 621.882.3 | GB 9459-88 | 代替 GB59、60-76
Hexagon thin slotted nuts--Fine pitch thread -Product grades A and B
-- GB /T 13680-92 |
Square weld nuts
-- GB /T 13681-92 |
Hexagon weld nuts
-- GB /T 17880.1-1999 |
Flat head riveted nuts
-- GB /T 17880.2-1999 |
Countersunk head riveted nuts
-- GB /T 17880.3-1999 |
Small countersunk head riveted nuts
-- GB /T 17880.4-1999 |
120°Small countersunk head riveted nuts
-- GB /T 17880.5-1999 |
Flat head hexagon riveted nuts
-- ISO 4166:1979 | GB /T 18195-2000 |
Hexagon nuts for fine mechanics
查看螺钉的所有分类螺钉
   
-- ISO 1207:1992 | GB /T 65-2000 | 代替 GB/T 65-1985
Slotted cheese head screws
-- ISO 1580:1994 | GB /T 67-2000 | 代替 GB/T 67-1985
Slotted pan head screws
-- ISO 2009:1994 | GB /T 68-2000 | 代替 GB/T 68-1985
Slotted countersunk flat head screws (common head style)
-- ISO 2010:1994 | GB /T 69-2000 | 代替 GB/T 69-1985
Countersunk slotted raised head screws (common head style)
-- ISO 4762:1997 | GB /T 70.1-2000 | 代替 GB/T 70-1985
Hexagon socket head cap screws
-- ISO 7380:1997 | GB /T 70.2-2000 |
Hexagon socket button head screws
-- ISO 10642:1997 | GB /T 70.3-2000 |
Hexagon socket countersunk head screws
-- UDC 621.882.219 | GB 71-85 | 代替 GB71-76
Slotted set screws with cone point
-- UDC 621.882.2 | GB 72-88 | 代替 GB72-76
Slotted setscrews with cone point
-- UDC 621.882.219.4 | GB 73-85 | 代替 GB73-76
Slotted set screws with flat point
-- UDC 621.882.219.4.092.6 | GB 74-85 | 代替 GB74-76
Slotted set screws with cup point
-- UDC 621.882.219.4.092.5 | GB 75-85 | 代替 GB75-76
Slotted set screws with long dog point
-- ISO 4026:1993 | GB /T 77-2000 | 代替 GB/T 77-1985
Hexagon socket set screws with flat point
-- ISO 4027:1993 | GB /T 78-2000 | 代替 GB/T 78-1985
Hexagon socket set screws with cone point
-- ISO 4028:1993 | GB /T 79-2000 | 代替 GB/T 79-1985
Hexagon socket set screws with dog point
-- ISO 4029:1993 | GB /T 80-2000 | 代替 GB/T 80-1985
Hexagon socket set screws with cup point
-- UDC 621.882.2 | GB 83-88 | 代替 GB83-76
Square set screws with long dog point and rounded end
-- UDC 621.882.2 | GB 84-88 | 代替 GB84-76
Square set screws with cup point
-- UDC 621.882.2 | GB 85-88 | 代替 GB85-76
Square set screws with long dog point
-- UDC 621.882.2 | GB 86-88 | 代替 GB86-76
Square set screws with short dog point and cone end
-- ISO 7045:1994 | GB /T 818-2000 | 代替 GB/T 818-1985
Pan head screws with cross recess
-- ISO 7046-1:1994 | GB /T 819.1-2000 | 代替 GB/T 819-1985
Countersunk flat head screws (common head style)with cross recess-Part 1:Steel of property class 4.8
-- ISO 7046-2:1990 | GB /T 819.2-1997 |
Cross recessed countersunk flat head screws (common head style)-Grade A-Part 2:Steel of property class 8.8, stainless and non-ferrous metals
-- ISO 7047:1994 | GB /T 820-2000 | 代替 GB/T 820-1985
Countersunk raised head screws (common head style) with cross recess
-- UDC 621.882.2 | GB 821-88 | 代替 GB821-76
Square set screws with chamfered end
-- ISO 7048:1998 | GB /T 822-2000 | 代替 GB/T 822-1988
Cheese head screws with cross recess
-- UDC 621.882.2 | GB 823-88 | 代替 GB823-76
Cross recessed small pan head screws
-- UDC 621.882 | GB 825-88 | 代替 GB825-76
Eyebolts
-- UDC 621.882.2 | GB 828-88 | 代替 GB828-76
Slotted pan head set setscrews with dog point
-- UDC 621.882.2 | GB 829-88 | 代替 GB829-76
Slotted setscrews with dog point
-- UDC 621.882.2 | GB 830-88 | 代替 GB830-76
Slotted cheese head screws with shoulder
-- UDC 621.882.2 | GB 831-88 | 代替 GB831-76
Slotted shoulder screws
-- UDC 621.882.2 | GB 832-88 | 代替 GB832-76
Slotted capstan screws
-- UDC 621.882.2 | GB 833-88 | 代替 GB833-76
Slotted large cheese head screws
-- UDC 621.882.2 | GB 834-88 | 代替 GB834-76
Knurled thumb screws
-- UDC 621.882.2 | GB 835-88 | 代替 GB835-76
Knurled screws
-- UDC 621.882.2 | GB 836-88 | 代替 GB836-76
Knurled screws with small head
-- UDC 621.882.2 | GB 837-88 | 代替 GB837-76
Slotted pan head screws with waisted shank
-- UDC 621.882.2 | GB 838-88 | 代替 GB838-76
Hexagon screws with waisted shank
-- UDC 621.882.2 | GB 839-88 | 代替 GB839-76
Knurled thumb screws with waisted shank
-- UDC 621.882.2 | GB 840-88 | 代替 GB840-79
Plastic diamond knurlhead screws
-- UDC 621.882.2 | GB 946-88 | 代替 GB946-76
Slotted raised head with shoulder
-- UDC 621.882.2 | GB 947-88 | 代替 GB947-76
Slotted large raised cheese head screws
-- UDC 621.882.2 | GB 948-88 | 代替 GB948-76
Slotted countersunk head screws with waisted shank
-- UDC 621.882.2 | GB 949-88 | 代替 GB949-76
Slotted raised countersunk head screws with waisted shank
-- UDC 621.882.2 | GB 2672-86 | 代替 GB2672-81
Hexagon lobular socket pan head screws
-- UDC 621.882.2 | GB 2673-86 | 代替 GB2673-81
Hexagon lobular socket countersunk head screws
-- UDC 621.882.2 | GB 2674-86 | 代替 GB2674-81
Hexagon lobular socket raised countersunk head screws
-- UDC 621.882.215.6 | GB 5281-85 |
Hexagon socket head shoulder screws
-- UDC 621.882.2 | GB 6190-86 | 代替 GB2671-81
Hexagon lobular socket head cap screws-property class 4.8
-- UDC 621.882.2 | GB 6191-86 | 代替 GB2671-81
Hexagon lobular socket head cap screws-property class 8.8 and 10.9
-- GB /T 13806.1-92 |
Fasteners for mechanics-Cross recessed screws
查看垫圈的所有分类垫圈
   
-- UDC 621.882.4 | GB 93-87 | 代替 GB93-76
Single coil spring lock washers Normal type
-- ISO 7091:2000 | GB /T 95-2002 | 代替 GB/T 95-1985
Plain washers-Product grade C
-- ISO 7093-1:2000 | GB /T 96.1-2002 | 代替 GB/T 96-1985
Plain washers-Large series-Product grade A
-- ISO 7093-2:2000 | GB /T 96.2-2002 | 代替 GB/T 96-1985
Plain washers-Large series-Product grade C
-- ISO 7089:2000 | GB /T 97.1-2002 | 代替 GB/T 97.1-1985
Plain washers-Product grade A
-- ISO 7090:2000 | GB /T 97.2-2002 | 代替 GB/T 97.2-1985
Plain washers,chamfered-Product grade A
-- ISO 8738:1986 | GB /T 97.3-2000 |
Plain washers for clevis pins
-- ISO 10673:1998 | GB /T 97.4-2002 | 代替 GB/T 9074.24、9074.25-1988
Plain washers for screw and washer assemblies
-- ISO 10669:1999 | GB /T 97.5-2002 | 代替 GB/T 9074.29、9074.30-1988
Plain washers for tapping screw and washer assemblies
-- ISO 7092:2000 | GB /T 848-2002 | 代替 GB/T 848-1985
Plain washers-small series-Product grade A
-- UDC 621.882.4 | GB 849-88 | 代替 GB849-76
Washers with ball face
-- UDC 621.882.4 | GB 850-88 | 代替 GB850-76
Washers with cone face
-- UDC 621.882.4 | GB 851-88 | 代替 GB851-76
Washers with split
-- UDC 621.882.4 | GB 852-88 | 代替 GB852-76
Square taper washers for I section
-- UDC 621.882.4 | GB 853-88 | 代替 GB853-76
Square taper washers for slot section
-- UDC 621.882.4 | GB 854-88 | 代替 GB854-76
Tab washers with long tab
-- UDC 621.882.4 | GB 855-88 | 代替 GB855-76
Tab washers with long tab and wing
-- UDC 621.882.4 | GB 856-88 | 代替 GB856-76
External tab washers
-- UDC 621.882.4 | GB 858-88 | 代替 GB858-76
Tab washers for round nut
-- UDC 621.882.4 | GB 859-87 | 代替 GB859-76
Single coil spring lock washers,Light type
-- UDC 621.882.4 | GB 860-87 | 代替 GB860-76
Curved spring washers
-- UDC 621.882.4 | GB 861.1-87 | 代替 GB861-76
Lock washers internal teeth
-- UDC 621.882.4 | GB 861.2-87 |
Serrated lock washers internal teeth
-- UDC 621.882.4 | GB 862.1-87 | 代替 GB862-76
Lock washers external teeth
-- UDC 621.882.4 | GB 862.2-87 |
Serrated lock washers external teeth
-- UDC 621.882.4 | GB 955-87 | 代替 GB955-76
Wave spring washers
-- UDC 621.882.4 | GB 956.1-87 | 代替 GB956-76
Countersunk external toothed lock washers
-- UDC 621.882.4 | GB 956.2-87 |
Countersunk Serrated external toothed lock washers
-- ISO 7094:2000 | GB /T 5287-2002 | 代替 GB/T 5287-1985
Plain washers-Extra large series-Product grade C
-- UDC 621.882.4 | GB 7244-87 |
Single coil spring lock washers,heavy type
-- UDC 621.882.4 | GB 7245-87 |
Curved Single coil spring lock washers
-- UDC 621.882.4 | GB 7246-87 |
Wave Single coil spring lock washers
查看木螺钉的所有分类木螺钉
   
-- UDC 621.882.2 | GB 99-86 | 代替 GB99-76
Slotted round head wood screws
-- UDC 621.882.2 | GB 100-86 | 代替 GB100-76
Slotted countersunk head wood screws
-- UDC 621.882.2 | GB 101-86 | 代替 GB101-76
Slotted raised countersunk head wood screws
-- UDC 621.882.2 | GB 102-86 | 代替 GB102-76
Hexagon head wood screws
-- UDC 621.882.2 | GB 950-86 | 代替 GB950-76
Cross recessed round head wood screws
-- UDC 621.882.2 | GB 951-86 | 代替 GB951-76
Cross recessed countersunk head wood screws
-- UDC 621.882.2 | GB 952-86 | 代替 GB952-76
Cross recessed raised head countersunk head wood screws
查看自攻螺钉的所有分类自攻螺钉
   
-- UDC 621.882.216.5.082.8 | GB 845-85 | 代替 GB845-76
Cross recessed pan head tapping screws
-- UDC 621.882.216.5.082.8 | GB 846-85 | 代替 GB846-76
Cross recessed countersunk head tapping screws
-- UDC 621.882.216.5.082.8 | GB 847-85 | 代替 GB847-76
Cross recessed raised countersunk head tapping screws
-- UDC 621.882.215.082.8 | GB 5282-85 |
Slotted pan head tapping screws
-- UDC 621.882.215.082.8 | GB 5283-85 |
Slotted countersunkhead tapping screws
-- UDC 621.882.215.082.8 | GB 5284-85 |
Slotted raised countersunkhead tapping screws
-- UDC 621.882.215.082.8 | GB 5285-85 |
Hexagon head tapping screws
-- UDC 621.882 | GB 6560-86 |
Cross recessed pan head thread forming screws
-- UDC 621.882 | GB 6561-86 |
Cross recessed countersunk head thread forming screws
-- UDC 621.882 | GB 6562-86 |
Cross recessed raised countersunk head thread forming screws
-- UDC 621.882 | GB 6563-86 |
Hexagon head thread forming screws
-- UDC 621.882 | GB 6564-86 |
Hexagon lobular socket thread forming screws
-- UDC 621.882.2 | GB 9456-88 |
Cross recessed hexagon head tapping screws with indentation
-- GB /T 13806.2-92 |
Fasteners for fine mechanics-Cross recessed tapping screws-Scrape point
-- GB /T 14210-93 |
Dry wall screws
-- ISO 15481:1999 | GB /T 15856.1-2002 | 代替 GB/T 15856.1-1995
Cross recessed pan head drilling screws with tapping screw thread
-- ISO 15482:1999 | GB /T 15856.2-2002 | 代替 GB/T 15856.2-1995
Cross recessed countersunk head drilling screws with tapping screw thread
-- ISO 15483:1999 | GB /T 15856.3-2002 | 代替 GB/T 15856.3-1995
Cross recessed raised countersunk head drilling screws with tapping screw thread
-- GB /T 15856.4-2002 | 代替 GB/T 15856.4-1995
Hexagon flange drilling screws with tapping screw thread
-- ISO 15480:1999 | GB /T 15856.5-2002 |
Hexagon washer head drilling screws with tapping screw thread
-- ISO 7053:1992 | GB /T 16824.1-1997 |
Hexzgon head tapping screws with collar
-- ISO 10509:1992 | GB /T 16824.2-1997 |
Hexagon flange head tapping screws
澳门威尼斯vns5533
   
-- ISO 1234:1997 | GB /T 91-2000 | 代替 GB/T 91-1986
Split pins
-- ISO 2339:1986 | GB /T 117-2000 | 代替 GB/T 117-1996
Taper pins
-- ISO 8736:1986 | GB /T 118-2000 | 代替 GB?T 118-1996
Taper pins with internal thread
-- ISO 2338:1997 | GB /T 119.1-2000 | 代替 GB/T 119-1986
Parallel pins,of unhardened steel and austenitic stainless steel
-- ISO 8734:1997 | GB /T 119.2-2000 | 代替 GB/T 119-1986
Parallel pins,of hardened steel and martensitic stainless steel (Dowel pins)
-- ISO 8733:1997 | GB /T 120.1-2000 | 代替 GB/T 120-1986
Parallel pins with internal thread, of unhardened steel and austenitic stainless steel
-- ISO 8735:1997 | GB /T 120.2-2000 | 代替 GB/T 120-1986
Parallel pins with internal thread,of hardened steel and martensitic stainless steel
-- UDC 621.886 | GB 877-76 | 代替 GB877-76
Taper pins with split
-- UDC 621.886 | GB 878-86 | 代替 GB878-76
Parallel pins with external thread
-- ISO 8752:1997 | GB /T 879.1-2000 | 代替 GB/T 879-1986
Spring-type straight pins-Slotted, heavy duty
-- ISO 13337:1997 | GB /T 879.2-2000 |
Spring-type straight pins-Slotted,light duty
-- ISO 8748:1997 | GB /T 879.3-2000 |
Spring-type straight pins-Coiled,heavy duty
-- ISO 8750:1997 | GB /T 879.4-2000 |
Spring-type straight pins-Coiled,standard duty
-- ISO 8751:1997 | GB /T 879.5-2000 |
Spring-type straight pins-Coiled,light duty
-- UDC 621.886 | GB 880-86 | 代替 GB880-76
Pins with split pin hole
-- ISO 8737:1986 | GB /T 881-2000 | 代替 GB/T 881-1986
Taper pins with external thread
-- UDC 621.886 | GB 882-86 | 代替 GB882-76
Clevis pins with head
-- GB /T 13829.1-92 |
Crooved pins-Parallel grooved
-- GB /T 13829.2-92 |
Crooved pins-taper grooved
-- GB /T 13829.3-92 |
Grooved pins-with round head or countersunk head
查看铆钉的所有分类铆钉
   
-- UDC 621.884 | GB 109-86 | 代替 GB109-76
Flat head rivets
-- UDC 621.884 | GB 827-86 | 代替 GB827-76
Rivets for name plate
-- UDC 621.884 | GB 863.1-86 | 代替 GB863-76
Round head rivets-Black
-- UDC 621.884 | GB 863.2-86 |
Round head rivets with small head-Black
-- UDC 621.884 | GB 864-86 | 代替 GB864-76
Cone head rivets-Black
-- UDC 621.884 | GB 865-86 | 代替 GB865-86
Countersunk head rivets-Black
-- UDC 621.884 | GB 866-86 | 代替 GB866-76
Oval countersunk head rivets-Black
-- UDC 621.884 | GB 867-86 | 代替 GB867-76
Round head rivets
-- UDC 621.884 | GB 868-86 | 代替 GB868-76
Cone head rivets
-- UDC 621.884 | GB 869-86 | 代替 GB869-76
Countersunk head rivets
-- UDC 621.884 | GB 870-86 | 代替 GB870-76
Oval countersunk head rivets
-- UDC 621.884 | GB 871-86 | 代替 GB871-76
Flat round head rivets
-- UDC 621.884 | GB 872-86 | 代替 GB872-76
Thin head rivets
-- UDC 621.884 | GB 873-86 | 代替 GB873-76
Oval head semi-tubular rivets
-- UDC 621.884 | GB 874-86 | 代替 GB874-76
120 degree countersunk head semi-tubular rivets
-- UDC 621.884 | GB 875-86 | 代替 GB875-76
Thin head semi-tubular rivets
-- UDC 621.884 | GB 876-86 | 代替 GB876-76
Tubular rivets
-- UDC 621.884 | GB 954-86 | 代替 GB954-76
120 degree countersunk head rivets
-- UDC 621.884 | GB 975-86 | 代替 GB975-76
Pipe type rivets
-- UDC 621.884 | GB 1011-86 | 代替 GB1011-76
Truss head rivets
-- UDC 621.884 | GB 1012-86 | 代替 GB1012-76
120 degree oval countersunk rivets
-- UDC 621.884 | GB 1013-86 | 代替 GB1013-76
Cone head semi-tubler rivets
-- UDC 621.884 | GB 1014-86 | 代替 GB1014-76
Truss head semi-tublar rivets
-- UDC 621.884 | GB 1015-86 | 代替 GB1015-76
Countersunk head semi-tublar rivets
-- UDC 621.884 | GB 1016-86 | 代替 GB1016-76
Headless rivets
-- GB 12615-90 |
Mushroom head break mandrel closed end blind rivets
-- GB 12616-90 |
120 deg flush head break mandrel closed end blind rivets
-- GB 12617-90 |
120 deg flush head break mandrel blind rivets
-- GB 12618-90 |
Mushroom head break mandrel blind rivets
-- GB /T 15855.1-1995 |
Flat round head drive rivets
-- GB /T 15855.2-1995 |
Countersunk head drive rivets
查看挡圈的所有分类挡圈
   
-- UDC 621.885 | GB 883-86 | 代替 GB883-76
Lock rings with cone pin
-- UDC 621.885 | GB 884-86 | 代替 GB884-76
Lock ring with screw
-- UDC 621.885 | GB 885-86 | 代替 GB885-76
Lock rings with screw and circlip
-- UDC 621.885 | GB 886-86 | 代替 GB886-76
Rings for shoulder
-- UDC 621.885 | GB 891-86 | 代替 GB891-76
Lock rings at the end of shaft with screw
-- UDC 621.885 | GB 892-86 | 代替 GB892-76
Lock rings at the end of shaft with bolt
-- UDC 621.885 | GB 893.1-86 | 代替 GB893-76
Circlips for holes-type A
-- UDC 621.885 | GB 893.2-86 |
Circlips for hole-type B
-- UDC 621.885 | GB 894.1-86 | 代替 GB894-76
Circlips for shaft-type A
-- UDC 621.885 | GB 894.2-86 |
Circlips for shaft-type B
-- UDC 621.885 | GB 895.1-86 | 代替 GB895-76
Roundwire snap rings for hole
-- UDC 621.885 | GB 895.2-86 | 代替 GB895-76
Roundwire snap rings for shaft
-- UDC 621.885 | GB 896-86 | 代替 GB896-76
“E”rings
-- UDC 621.885 | GB 921-86 | 代替 GB921-76
Round wire circlips
-- UDC 621.885 | GB 960-86 | 代替 GB960-76
Grip rings
澳门威尼斯线上赌城紧固件-组合件和连接副
   
-- GB /T 1228-91 | 代替 GB1228-84
High strength bolts with large hexagon head for steel structures
-- GB /T 1229-91 | 代替 GB1229-84
High strength large hexagon nuts for steel structures
-- GB /T 1230-91 | 代替 GB1230-84
High strength plain washers for steel structures
-- GB /T 3632-1995 | 代替 GB3632-83
Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
-- ISO 10644:1998 | GB /T 9074.1-2002 | 代替 GB/T 9074.1、9074.14-1988
Bolt or screw and washer assemblies with plain washers
-- UDC 621.882 | GB 9074.2-88 |
Cross recessed pan head screw and serrated lock washer external teeth assemblies
-- UDC 621.882 | GB 9074.3-88 |
Cross recessed pan head screw and single coll spring lock washer assemblies
-- UDC 621.882 | GB 9074.4-88 |
Cross recessed pan head screw, single coil spring lock washer assemblies
-- UDC 621.882 | GB 9074.5-88 |
Cross recessed small pan head screw and small plain washer assemblies
-- UDC 621.882 | GB 9074.6-88 |
Cross recessed small pan head screw and big plain washer assemblies
-- UDC 621.882 | GB 9074.7-88 |
Cross recessed small pan head screw and single coil spring lock washer assemblies
-- UDC 621.882 | GB 9074.8-88 |
Cross recessed small pan head screw, single coil spring lock washer and plain washer assemblies
-- UDC 621.882 | GB 9074.9-88 |
Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
-- UDC 621.882 | GB 9074.10-88 |
Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
-- UDC 621.882 | GB 9074.11-88 |
Cross recessed hexagon bolt with indentation and plain washer assemblies
-- UDC 621.882 | GB 9074.12-88 |
Cross recessed hexagon bolt with indetation single coil spring lock washer assemblies
-- UDC 621.882 | GB 9074.13-88 |
Cross recessed hexagon bolt with indetation,single coil lock washer and plain washer assemblies
-- UDC 621.882 | GB 9074.15-88 |
Hexagon head bolt and single coil spring lock washer assemblies
-- UDC 621.882 | GB 9074.16-88 |
Hexagon head bolt and serrated lock washer external teeth assemblies
-- UDC 621.882 | GB 9074.17-88 |
Hexagon head bolt,single coil spring lock washer and plain washer assemblies
-- ISO 10510:1999 | GB /T 9074.18-2002 | 代替 GB/T 9074.18、9074.19、9074、22、9074、23-1988
Tapping screw and washer assemblies with plain washers
-- UDC 621.882 | GB 9074.20-88 |
Cross recessed hexagon head tapping screw with indentation and plain washer assemblies
-- UDC 621.882 | GB 9074.21-88 |
Cross recessed hexagon head tapping sorew with indentation and large plain washer assemblies
-- UDC 621.882 | GB 9074.26-88 |
Single coil spring lock washer for assembly
-- UDC 621.882 | GB 9074.27-88 |
Serrated lock washer external teeth for assembly
-- UDC 621.882 | GB 9074.28-88 |
Lountersunk external toothed lock washer for assembly
-- GB /T 13807.1-92 |
Connections with waisted stud-Tape classification
-- GB /T 13087.2-92 |
Connections with waisted stud-Studs
-- GB /T 13087.3-92 |
Connections with waisted stud-Nuts,extension sleeves
-- ISO 7411:1984 | GB /T 18230.1-2000 |
Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)-Product grade C-Property classes 8.8 and 10.9
-- ISO 7412:1984 | GB /T 18230.2-2000 |
Hexagon bolts for high-strengthstructural bolting with large width across flats(short thread length)-Product grade C-property classes 8.8 and 10.9
-- ISO 4775:1984 | GB /T 18230.3-2000 |
Hexagon nuts for high-strength structural bliting with large width across flats-Product grade B-Property classes 8 and 10
-- ISO 7414:1984 | GB /T 18230.4-2000 |
Hexagon nuts for structural bolting with large width across flats,style 1-Product grade B-Property class 10
-- ISO 7416:1984 | GB /T 18230.5-2000 |
Plain washers for high-strength structural bolting hardened and tempered
-- ISO 7413:1984 | GB /T 18230.6-2000 |
Hexagon nuts for structural bolting,style 1,hot-dip galvanized(oversize tapped)-Product grade A and B-Property classes 5.6 and 8
-- ISO 7417:1984 | GB /T 18230.7-2000 |
Hexagon nuts for structural bolting,style 2,hot-dip galvanized(oversize tapped)-Product grade A -Property class 9
查看焊钉的所有分类焊钉
   
-- GB 10432-89 |
Headless studs for stud welding
-- GB /T 10433-2002 | 代替 GB/T 10433-1989
Cheese head studs for arc stud welding

配套供货商
   



法律声明: 本网站中的厂商资料,供货,需求,合作等信息由本网站的注册会员发布,其合法性和真实性由各个发布信息的注册会员负责。

- - - - - - - - -
Copyright © 2012 All rights reserved.
站点维护: 电子邮箱:    7*24小时服务热线:13710993339
联系电话/传真:广州:(020)38861363 / 38861343  杭州:(0571)87166630 / 87166613  
经营许可证编号: 备案号: